OBDSTAR X300 DP Plus X300 PAD2 C Package Full Version 8inch Tablet Support Toyota Smart Key and ECU Programming
- Brands Obdstar
- Product Code: OS1818
- Availability: In Stock
- 40.00cm * 32.00cm * 15.00cm (L x W x H)
OBDSTAR X300 DP Plus X300 PAD2 C Package Full Version 8inch Tablet Support Toyota Smart Key and ECU Programming
OBDSTAR X300 DP Plus X300 PAD2 C Package Full Version
OBDSTAR X300 DP Plus is a new Android-based vehicle trouble diagnostic device developed for internet applications. It inherits from OBDSTAR advanced diagnosing technology and it is characterized by covering wide range of vehicles, featuring powerful function, and providing precise result. Through vehicle diagnostic OBD connector and variant mobile intelligent terminals, it achieves vehicle trouble diagnosis for full car model and full system vehicle.
Meanwhile, taking advantage of mobile internet, this device integrates more application and service, such as Maintenance Database, remote assistant, One Key Upgrade etc.
Free Update Online for one year, after one year, it will cost $285 per year.
OBDSTAR X300 DP Plus X300 PAD2 C Package Full Version Functions:
Immobilizer+Mileage correction+Diagnosis+Special function (Oil rest +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag rest+TPMS+Steering angle rest+OBDII+DPF+Injector code+Supension matching+Gear learning+CVT learning+EEPROM+Key renewing+ECU cloning)Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smarkt key Emulator)+others(Ignition coil+Remote tester)
OBDSTAR X300 DP Plus Hardware Features:
1. The built-in VCI box offers more stable communication.
2. The 8" touch screen offers better vision experience.
3. Allow the user to charge by the OBD port of car. Not like the X300 DP 7" Pad, which need to be 100% charged before use.
4. With specialized toolkit, high grade and practical.
5. Industrial -grade design, comes with the silicone sleeve
6. The back bracket allows the user to hang it on the steering wheel or stand on the table, which brings great convenience to the operator.
7. Comes with Toyota Lexus Emulators (The first 4 pieces are already released, and the 5th one is under development)
8. The following 3 adapters are integrated into the X300 PAD plus: EEPROM /PIC 2-in-1 adapter, RFID adapter (VW Audi 4th / 5th IMMO programming and other cars e.g Porsche, BMW, Fiat etc.) and Renew Key PCF79XX adapter.
9. Adds the clip for reading SOP 8PIN EEPROM.
10. Adds the cables for reading ECU via OBD (Used to clone ECU and active the switch).
OBDSTAR X300 DP Plus Software Features:
1. Clone ECU
Clone ECU means copy ECU, that is the OBDSTAR X300 DP Plus copies the data from the original car ECU, then write it into another same ECU hardware, so that it can achieve the same function as the original ECU.
When you want to change the new ECU or the second ECU, if you use X300 DP Plus to clone via OBD, you won't need to go to the 4s store to do the online programming or dismantle ECU to weld, read & write.
ECU clone Pros :
No need to go to 4S shop, convenient, fast and save money.
Simplify the operating steps, even the amateur can also operate.
No need to dismantle and weld the ECU to read & write, it is zero risk to clone ECU via OBD with the X300 DP Plus.
2. Switch activation function
Nowadays, many car models' secondary power supply of the dashboard or audio equipment needs to be activated to enter the boot status through the related module CAN.
However, when the car technician maintains the dashboard / audio equipment, the main unit is out of the CANBUS network so it maybe won't boot. X300 DP plus " switch activation function" can emulate the CANBUS communication to active the power supply of dashboard / Audio so that it can enter the boot status, then it will test and verify the dashboard and the Audio, also the technician can save money avoiding to purchase many the boot platform and cables of kinds of car models.
3. Adds the "Help" function including the testable car models, update notice, special features, help instruction, wiring diagram etc.
Testable car models: The user can read the testable car models and year.
Update notice: The user can read all of the update content.
Features: The user can read all of the special features and the functions that only X300 DP Plus supports.
Help instruction: Built-in the guide and instruction for each car model or function.
Wiring diagram: Built-in ECU wiring diagram, more intuitive and convenient.
4. Maintenance database: equipped with powerful database.
5. Video center: large amount of videos help users to operate device easily.
6. One Key Upgrade: built-in WIFI mode can realize application downloading and diagnostic function by one key upgrade.
7. System setting: set VCI formation, language, unit, data logging, user information etc.
8. Remote assistance: achieve remote assistance by this function.
9. Report center: record maintenance data logging and create reports during operation.
10. USB Inspection Camera (optional): Flexible and long pipe with HD camera, it can reach car interior pipeline or narrow space to have an overall inspection.
OBDSTAR X300 DP Plus Technical Parameter:
● Operation system: Android 5.1.1
● CPU: Exynos4418 Dual Core ARM Cortex A9 1.4GHz
● Battery: 3700mA, rechargeable polymer lithium battery
● Extension memory card: 32G Micro SD (TF) card supported
● Memory capacity: 1GB
● Storage capacity: 32GB
● LCD: 8.0 inch
● LCD resolution: 1280*800
● Touch screen: Capacitive touch screen
● Camera: 5 mega rear view camera
● Wi-Fi: Supported
● Working temperature: -10℃ ~ 55℃（14℉ ~ 131℉ ）
● Storage temperature: -20℃ ~ 70℃（-4℉ ~ 158℉ ）
● Weight: about 1.0 Kg
● Dimension: 254mm*174*mm*35mm
OBDSTAR X300 DP Plus vs OBDSTAR X300 DP PAD:
OBDSTAR X300 DP Plus have back holder,it can work separately without VCI and Charged by OBD2.
4 Toyota emulators
Wiring harness for new functions,such as ECU cloning and switch activation
ECU clone switch activation function
Help function-covers built in support car list,upgrade announcement,help notes and wiring diagrams
No need pay for software update ofr free during the valid time (one year)
OBDSTAR X300 DP Plus Software Update Instruction: Tap "One Key Upgrade" to enter one key upgrade page, as following picture shown:
Tap “One Key Upgrade” to start downloading, enter main interface after
finishing downloading. (Notes: Ensure internet connection is normal when
updating. Besides, because of many software, it may take several
minutes, please wait patiently) If need to cancel a software, just tap
corresponding Check Box as following picture shown:
OBDSTAR Update Information:
Update Announcement on 13.12.2018
Lastet IMMO Update
No Need Pincode
BR453 Key Programming Bypass via OBD
Increased TWINGO 2014-(No Need Pincode)
Key Programming and data recovery function
Increased XRAY 2015-(No Need Pincode)
Key programming and data recovery function
Increased LODGY type2 (No Need Pincode)
Key programming and data recovery function
Pincode read and precode key via OBD
Update Announcement on 30.11.2018
Verna IMMO system
IX35 remote system
Mistra 2014- remote system
Avante 2012- remote system
Accent 2005- remote system
I30 2009-2013 remote system
SONTA NF 2009-2010 remote system
Verna 2010-2016 remote system
Elant 2004-2017 remote system
SONTA EF 2004-2008 remote system
Increased remote system type 6
Elantra 2008-2011/2012- remote system
Verna 2017 IMMO system and remote system
IX25 2014- IMMO system and remote system
New Tucson 2012- IMMO system and remote system
Verna 2016-2017 remote system and smart key system
Sonata 2015-2017 remote system and smart key system
Elantra HDC EV IMMO system, remote system and smart key system
New Elantra 2017 IMMO system, remote system and smart key system
Sonata 8 2011-2016 IMMO system, remote system and smart key system
Optimized 2008-2011Elantra key programming procedure:
Firstly enter the pin code, then start key programming
K2 2011 remote system
K3 2012- remote system
K5 2011-2013 remote system
Remote system type4 and type5
Cadenza (VG)2010-2011 remote system
OPTIMA 2004-2014 remote system
SORENTO 2007-2008 remote system
SPORTAGE 2008-2014 remote system
CARENS/RONDO 2014-2016 remote system
KX3 IMMO system and remote system
CADENZA/K7 IMMO system and remote system
KX5 remote system and smart key system
KX7 remote system and smart key system
Cadenza (VG)2013-2016 remote system and smart key system
OPTIMA(MAGENTIS) 2007-2010 remote system and smart key system
Smart key system (no card slot) type7
BORREGO 2009-2011 smart key system
CARNIVAL(SEDONA)1998-2001 IMMO system
OPIRUS(AMANTI) 2009-2010 IMMO system, remote system and smart key system
1.Increased IMMO pre-coding function
2.Increased remote programming function
3.Increased Viaggio vehicles pre-coding function
4.Develop key programming function(all models)
5.Increased 3379+93C86 reading and writing FLASH function
6.Increased ECU version information collection in pre-coding process
7.First released Fiat(Brazil Only)/Ferrari/Alfa Romeo Key Programming
8.Increased network connection prompt and detection in IMMO pre-coding function
Optimized the 3K91D pre-coding
Optimized Viaggio vehicles (no dentate knob) key programming
New Increased in pin code reading:
1.Increased Lacrosse 2017- BCM pin code reading
2.Increased Regal 2017- BCM pin code reading
3.Increased Envision 2017- BCM pin code reading
4.Increased Encore 2017- BCM pin code reading
5.Increased GL8(2.5L) 2017- BCM pin code reading
1.Increased ATS 2017- BCM pin code reading
2.Increased ATSL 2017- BCM pin code reading
3.Increased XTS 2018- BCM pin code reading
4.Increased XT5 2017- BCM pin code reading
5.Increased CT6 2017- BCM pin code reading
6.Increased Escalade 2018- BCM pin code reading
1.Increased Cruze 2017- BCM pin code reading
2.Increased Malibu 2017- BCM pin code reading
3.Increased XL Malibu XL 2017- BCM pin code reading
4.Increased Camaro 2016- BCM pin code reading
5.Increased SILVERADO 2017- BCM pin code reading
6.Increased SUBURBAN 2017- BCM pin code reading
7.Increased TAHOE 2017- BCM pin code reading
1. Increased SIERRA 2017- BCM pin code reading
2. Increased YUKON 2017- BCM pin code reading
New Increased in smart key system:
1. Envision 2017- smart key system
2. GL8(2.5L) 2017- smart key system
1.Camaro 2017- smart key system
2.Silverado 2017- smart key system
3.Suburban 2017- smart key system
4.Tahoe 2017- smart key system
1. XTS 2018- smart key system
2. Escalade 2018- smart key system
1. Sierra 2017- smart key system
2. Yukon 2017- smart key system
Optimized Buick Excelle 2015-2017 without smart key system
Increased the network connection prompt and detection in BCM pin code reading function
1.Increased Peugeot 5008 smart key system
2.Optimized 2017 Citroen C4 smart key system
1.Increased the internet status judgement
2.Optimized the Johnson control dashboard function
3.Optimized some old models long-time waiting problem in cluster calibration
1.Increased Clio 4/CAPTUR
2.Optimized Clio 4 and relevant prompt
3.Optimized Megane 02-08/DUSTER 14-18 key programming function
1.Optimized pin code reading procedure
2.Increased DACIA pin code reading menu
3.Increased prompt for some models don’t support
4. Increased 95040 pin code calculator
(support：DUSTER 2010-2014 LOGAN ; 2010-2013 SYMBOL 2010-2013) Read PinCode --- Type 3(From 95040 EEPROM)
1.Increased KA models pre-coding function
2.Increased 2013- Transit key programming function Type1
Increased L200 TRITON under Australia district
Shielded IMMO system ISO protocol
Increased BAIHC HYOSOW H2 smart key system
1.Revised the ’Help’ instruction
2.Revised cfg profile and car logo
3.Optimized smart key system type 5 procedure
4.Revised the prompt in making dealer key process
1.Increased 20 to 8 online calculation (Type51)
2.Revised the problem in cfg file and car logo duplicate
1.Increased Lacrosse 2017- cluster calibration
2.Increased Regal 2017- cluster calibration
3.Increased Envision 2017- cluster calibration
4.Increased Encore 2017- cluster calibration
5.Increased GL8(2.5L) 2017- cluster calibration
1.Increased ATS 2017- cluster calibration
2.Increased ATSL 2017- cluster calibration
3.Increased XTS 2018- cluster calibration
4.Increased XT5 2017- cluster calibration
5.Increased CT6 2017- cluster calibration
6.Increased Escalade 2018- cluster calibration
1.Increased Cruze 2017- cluster calibration
2.Increased Malibu 2017- cluster calibration
3.Increased XL Malibu XL 2017- cluster calibration
4.Increased Camaro 2017- cluster calibration
5.Increased SILVERADO 2017- cluster calibration
6.Increased SUBURBAN 2017- cluster calibration
7. Increased TAHOE 2017- cluster calibration
1.Increased SIERRA 2017- cluster calibration
2.Increased YUKON 2017- cluster calibration
Solved the Silverado 2003-2006 cluster calibration security verification failure
Solved some GLK X204 chassis vehicles cluster calibration failure
1.Revised the log in judgement mechanism
2.Revised the way log out from the function menu
Revised profile preserve route to be the ‘DATA\\’menu
1.Revised software structure
2.Optimized the communication time according to the vehicle test
3. Display the reading and writing EEPROM and FLASH function after logging into the system
4. Increased a security algorithm scan in BOSCH 3385+24C16、BOSCH 3469+24C16、BOSCH 3558+24C32 type
Increased vehicle search and upgrade search
Update Announcement of 31.10.2018
Increased DELPHI 70F3379+93C86 pin code reading function
1.Optimized VESTA 2015- pin code reading procedure
2.Optimized 2008- KANGOO pin code calculation method
Optimized Opel Corsa D key programming
1. Increased MQB calculation type
2. Increased VW Beetle IMMO pin code reading
3. Solved EEPROM reading problem for part of Audi models
1.Updated 2018 Explorer (smart key system) key programming bypass
2.Updated 2018 New Mondeo (smart key system) key programming bypass
3.Increased Lincoln 2015- MKC/MKZ/Continental smart key programming
4.Ford 2013- Transit/2015- Escort/New Mondeo/EVEREST/FIGO/FIGO ASPIRE/FUSION/GALAXY/RANGER IMMO key programming
5.Ford 2015- New Mondeo/EDGE/EXPLORER/EVEREST/F-150/F-250/F-350/FIGO/FIGO ASPIRE/ GALAXY/RANGER/TAURUS/MUSTANG smart key programming
Increased Refine A60/M5/S2/S3/S7 smart key system
Supports: program ESCL, add new key, add old key, erase key, read the key quantity, reset IMMO ECU, reset engine ECU,program IMMO ECU, progr
OBDSTAR X300 DP Plus Programming Key Megane 4 Model 2016
OBDSTAR X300 DP Plus X300 PAD2 Package List:
Key Master DP Plus Unit
12V2A DC Charger
OBD II-16 Connector
IMMO Induction Coil
P001 Programmer Unit
C001/C002 Circuit Board
TOYOTA Simulation Smart Keys
Configuration List/Certificate/Quick Start Guide Fold
Scan OBDSVS QR code to order anywhere and anytime by mobile phone
Live Support: please click 'online chat' at the right bottom.
skype: mary_obdsvs; judie_obdsvs; amy_obdsvs
We usually ship goods By DHL and China post.
DHL: 3-5 days
If you want ship by UPS, EMS, Fedex,Aramex,
UPS and Fedex: 5-7 days
Aramex and EMS: 10-15 working days （this express can’t ship with battery）
China post: 7- 20 working days. At most 45 days.
If you have not received the goods during the normal time, please contact us for checking the package status timely online or by email.
1.Warranty Time： within 7 days after receiving package， Buyer: Submit a complaint(Mail email@example.com ) and Return the items to Seller's assigned address by DHL or Post. Seller: If can not repair,exchange a new one (Items must be in new condition with original packaging and accessories.) ship cost: Seller
2:within 8-14 days after receiving package: Buyer: Submit a complaint and Return the items to assigned address by DHL or Post for repairing. Seller: If can not repair,exchange a new one (Items must be in new condition with original packaging and accessories.)
Return Ship cost: Buyer, Resend ship cost: Seller
3.within 15 days to 1 year after receiving package. Buyer: Submit a complaint and Return the items to assigned address by DHL or Post for repairing, Ship cost: Buyer
Lost in the delivery:
1.30 days after shipping, Buyer: Submit proof to seller, Seller: Contact carrier to ask for Claimant and arrange another shipment to buyer, Ship Cost: Seller
1.30 days after shipping，Buyer: Finish customs clearance when import，Seller: Try to help buyer to finish customs clearance but not responsible on this.
Customs duties or agent fees: Buyer。
Received wrong Items：
1.within 3 days after receiving package。Buyer: Report to Seller,and return the full package in good condition to assigned address by DHL or Post in 3 days. Seller: Arrange shipment for the correct items. Ship cost: Seller
Man-made Damage: such as update machine online, dismantle the equipment, and so on: within 1 year. Buyer: Report to Seller,and return the items for repairing to assigned address by DHL or Post. ship cost: Buyer
1.Warranty Policy only protects Main parts.Other parts are out of our warranty policy.
2.Before return,please confirm with us. we will give you a shipping address once confirmming the problem. Buyer will be responsible for any risks or costs without our permission.
3.Buyer needs return the items by cheaper DHL or Post, or we can't get them because of restrict Customs Policy.
4.The Warranty Policy fits for all products except some products which state the warranty specially in description.
Main Unit for Equipment 1 year warrnaty
Machine peripheral equipments and wire No warranty
Car diagnostic laptop 3 months
Data Hard Disk No warranty
Car software No warranty
Consumables No warranty