SVCI DoIP JLR Diagnostic Tool with PATHFINDER & JLR SDD V156 with Online Programming Function for Jaguar Land Rover 2005-2020 $538
Allscanner VXDIAG VCX HD Heavy Duty Truck Diagnostic System for CAT, VOLVO, HINO, Cummins, Nissan $570
Lonsdor JLR IMMO Key Programmer by OBD Add KVM and BCM Update Online $319
JLR V145 SDD Mangoose 2013D VIDA for Volvo V9.30.002 TIS Techstream for Toyota 3 In 1 Scanner $45.90
SVCI DoIP JLR Diagnostic Tool with PATHFINDER & JLR SDD V158 with Online Programming Function for Jaguar Land Rover 2005-2020
STC SVCI DoIP Product Overview
The SVCI DoIP Vehicle Communication Interface (VCI) is used by
professional technicians as an aid in diagnosing and repairing vehicle
electrical and electronic systems. The SVCI DoIP is designed to connect
the vehicle to a host PC computer application which then functions
though the SVCI DoIP for data transfer and Electronic Control Unit
(ECU) reprogramming. Using the VCI Manager PC application software, The
SVCI DoIP is capable of communicating over a USB cable.
The SVCI DoIP is a standard-based tool – supporting the SAE J2534
interface, and the ISO22900-2 Diagnostic-Protocol Data Unit (D-PDU) API.
Fully support JLR diagnostic software SDD2 and Pathfinder, including
diagnostic, ECU update, CCF configuration and all the functions of JLR.
STC SVCI DoIP Appearance and details
SVCI DoIP hardware has two LED light. Different LED represent
different states. The LED light on the left flashing green indicates
that the equipment is working normally, The LED light flashing red light
indicates that the firmware is being upgraded. The LED on the right
always lights up to indicate that DoIP protocol is activated, The LED on
the right is flashing, indicating that it is communicating with the
DoIP protocol. As shown in the figure below.
STC SVCI DoIP Technical Specifications
Protocol Type |
Protocol name |
Physical Layer |
l CANBUS Channel 1 at 125/250/500/1000kbps
l CANBUS Channel 2 at 125/250/500/1000kbps
l One UART channels (K & L Lines)
l One J1850 |
Communication Layer |
l ISO9141
l ISO14230
l J1850 PWM(Ford SCP)
l ISO14229 JLR Powertrain CANBUS
l ISO14229 JLR Body CANBUS
l ISO14229 JLR Chassis CANBUS
l ISO14229 JLR Comfort CANBUS
l ISO13400 DoIP |
Others |
l Pin voltage Measurement
l Programming Voltage Generator
l Internal Temperature Sensor
l Power through DLC or USB Type B Connector |
STC SVCI DoIP Supported vehicles list
Software Name |
Vehicle Name |
Model |
Years |
Support’s functions |
SDD2 |
Land Rover |
L316 |
2005~2016 |
All |
|
|
L319 |
2005~2016 |
All |
|
|
L320 |
2005~2016 |
All |
|
|
L322 |
2005~2016 |
All |
|
|
L359 |
2005~2016 |
All |
|
|
L405 |
2005~2016 |
All |
|
|
L494 |
2005~2016 |
All |
|
|
L550 |
2005~2016 |
All |
|
|
L538 |
2005~2016 |
All |
|
Jaguar |
X100 |
2005~2016 |
All |
|
|
X150 |
2005~2016 |
All |
|
|
X152 |
2005~2016 |
All |
|
|
X202 |
2005~2016 |
All |
|
|
X250 |
2005~2016 |
All |
|
|
X350 |
2005~2016 |
All |
|
|
X351 |
2005~2016 |
All |
|
|
X400 |
2005~2016 |
All |
Pathfinder |
Land Rover |
L405 |
2017~latest |
All |
|
|
L494 |
2017~latest |
All |
|
|
L462 |
2017~latest |
All |
|
Jaguar |
X152 |
2017~latest |
All |
|
|
X761 |
2017~latest |
All |
|
|
X760 |
2017~latest |
All |
|
|
X260 |
2017~latest |
All |
Note: All JLR models produced after 2016 are
applicable for pathfinder software, SVCI DoIP device will constantly
update and support the latest JLR models. |
How to Use STC SVCI DoIP?
If you want to use the SVCI DoIP device normally, you have to
download and install three software, they are Pathfinder, SDD2 and SDD2
"QuickLoader" software. These three software can be installed in the
same operating system together, and when you use SDD2 software, you
have to open it from the SDD2 "QuickLoader" software. And when the
software is installed, the device needs to be connected to the laptop
and vehicle. The Pathfinder software is primarily intended for Jaguar
Land rover models manufactured in 2017 and beyond, The SDD2 software is
mainly aimed at Jaguar Land rover 2016 years models and before.
STC SVCI DoIP Software Download and install software
Installation steps of the PATHFINDER software:
Step 1: Before installing the software, you need to make sure the C drive has a capacity of more than 250GB.
Step 2: Access to software download center http://www.flyobd.com/shop/download-center/
Step 3: Selection “Pathfinder” item and download pathfinder installer
Step 4: Double-click the file that you download and saved, and then install it.
Step 5: The pathfinder installer will automatically prompt you to
download and update the software and files you need to install
pathfinder(The automatic download and installation will takes up to 24
hours according to network download speed).
Installation steps of the SDD2 and SDD2 "QuickLoader" software:
Step 1:Download software from http://diagnosticdelivery.jlrext.com/idscentral/
Step 2:Selection the “SDD_xxx_Full.exe” file, download and save it.
Step 3:Double-click the “SDD_xxx_Full.exe” file and install it.
Step 4:Selection SDD2-"QuickLoader" item from http://www.flyobd.com/shop/download-center download and install it.
Step 5:Double-click the “SDD2 "QuickLoader".exe” file and install it.
2.2 Connected devices
After installing the software, you need to connect the equipment to
the computer using a USB cable. Then connect the OBD interface of the
vehicle through SVCI DoIP device, or connect the OBD interface of the
vehicle and the equipment through the OBD extension cord. The equipment
connection diagram is shown below.
SVCI DoIP Function Comparison With JLR VCI DoIP and DA-Dangle DoIP
Products |
SVCI DoIP |
JLR VCI DoIP |
DA-Dongle DoIP |
Installation Requirements |
Unlimited |
Unlimited |
Only win7 32bit system |
Installation Process |
Simple |
Simple |
Complex |
Communication Speed |
The fastest |
Faster |
Relatively slow |
Communication Stability |
Stabilization |
Stabilization |
General |
Automatic Scan to Read VIN |
√ |
√ |
√ |
Read DTC |
√ |
√ |
√ |
Read Single Data Stream |
√ |
√ |
√ |
Read Multiple Data Stream |
√ |
√ |
x |
ECU Reflash |
√ |
√ |
√ |
ECU Configuration |
√ |
√ |
√ |
STC SVCI DoIP FAQ
1.What is SVCI DoIP ?
SVCI DoIP is a special vehicle inspection tool for Jaguar Land rover models, it's manufactured by BAOCHI.
2.What does SVCI DoIP do?
SVCI DoIP hardware is compatible with SDD2 and Pathfinder software,
which can achieve all the functions of these two software, it includes
diagnostic, program ,immobilizer, change CCF configuration and special
function etc. By the way, the original DoIP device can achieve the
function, SVCI DoIP can also achieve.
3.Is there a version limit for SVCI DoIP to use SDD2 and pathfinder software, and can they be used for free?
SVCI DoIP hardware is compatible with all versions of SDD2 and
pathfinder. The software is free to use, and SDD2 software can be run
without registration.
4.When is SDD2 software used and when is pathfinder software used?
Use the SDD2 software when you come across a JLR vehicle from
2005-2016,When you come across the Jaguar Land rover models produced
after the 2017 model year, you need to use the Pathfinder software.
5.What are the advantages of SVCI DoIP ?
SVCI DoIP hardware equipment is suitable for all Jaguar Land rover
models of the year, and it can achieve all Jaguar Land rover functions.
SVCI DoIP hardware itself is small and easy to take. In addition, there
are several advantages:
1)High speed host communication. (3M bps)
2)Stable host communication. (with RTS/CTS flow control)
3)Automatically register software.
4)Online software update and keep software latest always.
5)Online firmware update.
STC SVCI DoIP Package List:
1pc x SVCI DOIP JLR DoiP VCI Hardware
Scan OBDSVS QR code to order anywhere and anytime by mobile phone
Contact Information:
Whatsapp: +8618928405957
Live Support: please click 'online chat' at the right bottom.
Email: info@obdsvs.com
skype: mary_obdsvs; judie_obdsvs; amy_obdsvs
Shipping Warranty:
We usually ship goods By DHL and China post.
DHL: 3-5 days
If you want ship by UPS, EMS, Fedex,Aramex,
UPS and Fedex: 5-7 days
Aramex and EMS: 10-15 working days (this express can’t ship with battery)
China post: 7- 20 working days. At most 45 days.
If you have not received the goods during the normal time, please contact us for checking the package status
timely online or by email.
Quality Problem:
1.Warranty Time: within 7 days after receiving package, Buyer: Submit a complaint(Mail toinfo@obdsvs.com )
and Return the items to Seller's assigned address by DHL or Post. Seller: If can not repair,exchange a new
one (Items must be in new condition with original packaging and accessories.) ship cost: Seller
2:within 8-14 days after receiving package: Buyer: Submit a complaint and Return the items to assigned
address by DHL or Post for repairing. Seller: If can not repair,exchange a new one (Items must be in new
condition with original packaging and accessories.)
Return Ship cost: Buyer, Resend ship cost: Seller
3.within 15 days to 1 year after receiving package. Buyer: Submit a complaint and Return the items to
assigned address by DHL or Post for repairing, Ship cost: Buyer
Lost in the delivery:
1.30 days after shipping, Buyer: Submit proof to seller, Seller: Contact carrier to ask for Claimant and
arrange another shipment to buyer, Ship Cost: Seller
Customs Problem:
1.30 days after shipping,Buyer: Finish customs clearance when import,Seller: Try to help buyer to finish
customs clearance but not responsible on this.
Customs duties or agent fees: Buyer。
Received wrong Items:
1.within 3 days after receiving package。Buyer: Report to Seller,and return the full package in good condition
to assigned address by DHL or Post in 3 days. Seller: Arrange shipment for the correct items. Ship cost:
Seller
Man-made Damage: such as update machine online, dismantle the equipment, and so on: within 1 year. Buyer:
Report to Seller,and return the items for repairing to assigned address by DHL or Post. ship cost: Buyer
Note:
1.Warranty Policy only protects Main parts.Other parts are out of our warranty policy.
2.Before return,please confirm with us. we will give you a shipping address once confirmming the problem.
Buyer will be responsible for any risks or costs without our permission.
3.Buyer needs return the items by cheaper DHL or Post, or we can't get them because of restrict Customs
Policy.
4.The Warranty Policy fits for all products except some products which state the warranty specially in
description.
Warranty Item
Main Unit for Equipment
1 year warrnaty
Machine peripheral equipments and wire No warranty
Car diagnostic laptop
3 months
Data Hard Disk
No warranty
Car software
No warranty
Consumables
No warranty